Product Information
Package Includes
· Fully Assembled and Tested Development Board with ATMega32 Microcontroller
· Serial Port Cable for Programmer
· CDROM containing JetFlasher ILAVR32 Programming Software and User Manual
· Power Adaptor
· 6 Months Warranty
Introduction
ILAVR32 is a development kit for AVR series ATMega32 microcontroller. The ILAVR32 board supports on board ISP Circuit for programming Flash memory via the board's RS232 port eliminating the need for separate device programmer. On-board switch toggles between programming and code execution modes. All the microcontroller's I/O ports are accessible via standard external headers for easy interfacing of external devices.
Features
Specifications
ILAVR32 JetFlasher
System Requirements
· Fully Assembled and Tested Development Board with ATMega32 Microcontroller
· Serial Port Cable for Programmer
· CDROM containing JetFlasher ILAVR32 Programming Software and User Manual
· Power Adaptor
· 6 Months Warranty
Introduction
ILAVR32 is a development kit for AVR series ATMega32 microcontroller. The ILAVR32 board supports on board ISP Circuit for programming Flash memory via the board's RS232 port eliminating the need for separate device programmer. On-board switch toggles between programming and code execution modes. All the microcontroller's I/O ports are accessible via standard external headers for easy interfacing of external devices.
Features
- Easy programming of the flash memory with a serial port of a computer.
- Built-in LEDs on port to test the output visually
- Toggling between programming/execution modes with a press of a single switch eliminating the need for any complex changes in the hardware.
- Output Headers provide access to all port pins for easy interfacing to external devices
- Target Embedded microcontroller ATMega32 is supplied with kit.
- On-Board adjustable Vref for the ADC
- On-Board RS232 Port for direct connection to PC's Serial Port
- Hex file can be downloaded easily with the help of a user-friendly InterLogicx ILAVR32 JetFlasherÔ Software
Specifications
- 32k bytes programmable flash
- 2k bytes SRAM
- 1K bytes EEPROM
- 32 I/O pins
- 8 channel 10 bit ADC
- 4 PWM Channels
- Two 8-bit timers/counters
- One 16-bit timer/counter
- 1 hardware serial UART
- Two wire Serial Interface TWI
- SPI master/slave
- Power consumption ~ 20 mA
ILAVR32 JetFlasher
- Programs Intel Hex files.
- Straightforward and intuitive user interface
- Requires RS-232 port of PC for operation
- Three simple steps to program the flash device.
System Requirements
- Windows 95/98/ME/NT/2000/XP
- RS-232 Port
- 16MB RAM
- 3MB Disk Space