Product Code :Product Name : |
10304MCS51 USB BOARD |
Product Information
Package Includes
· Fully Assembled and Tested Development Board with P89V51RD2 Microcontroller
· USB Cable for PC interfacing and Programming
· CDROM containing Interlogicx ILMCS51 JetFlasher - Programming Software and User Manual
Introduction
ILMCS51USB is a USB compatible development board for P89V51RD2 microcontroller. The ILUSBMCS51 board supports on board ISP Circuit for programming Flash memory via the USB port eliminating the need for separate device programmer. On-board switch toggles between programming and code execution modes. All the microcontroller's I/O ports are accessible via standard external headers for easy interfacing of external devices.
Features
· Fully Assembled and Tested Development Board with P89V51RD2 Microcontroller
· USB Cable for PC interfacing and Programming
· CDROM containing Interlogicx ILMCS51 JetFlasher - Programming Software and User Manual
Introduction
ILMCS51USB is a USB compatible development board for P89V51RD2 microcontroller. The ILUSBMCS51 board supports on board ISP Circuit for programming Flash memory via the USB port eliminating the need for separate device programmer. On-board switch toggles between programming and code execution modes. All the microcontroller's I/O ports are accessible via standard external headers for easy interfacing of external devices.
Features
- Easy programming of the flash memory with a USB Port of a computer.
- Toggling between programming/execution modes with a single switch eliminating the need for any complex changes in the hardware.
- Output Headers provide access to all port pins for easy interfacing to external devices
- Target Embedded microcontroller Philips P89V51RD2 is supplied with kit.
- On-Board USB Port for direct connection to PC's USB Port
- Hex file can be downloaded easily with the help of a user-friendly InterLogicx ILMCS51 JetFlasher Software
- 64kb on chip flash program memory
- 1Kb RAM memory
- 3 Timers/counters
- 8 Interrupts / 4 Priority level
- One hardware serial UART
- 32 I/O lines
- Power down mode
- SPI Master
- WDT
- Programs Intel Hex files.
- Straightforward and intuitive user interface
- Requires USB port of PC for operation
- Three simple steps to program the flash device.
- Windows 95/98/ME/NT/2000/XP
- USB Port
- 16MB RAM
- 3MB Disk Space