Product Information
Package Includes
• Fully Assembled and Tested Atmel 89 series Device programmer
• Serial Port Cable for PC interfacing
• CDROM containing Interlogicx JetFlashex - Programming Software and User Manual
• Power Adaptor
Introduction
ILPMCSPRO is a Device Programmer Board for Programming the flash memory of major Atmel 89 Series Microcontrollers, Ideally suited for Project Deployment .Simple to use & low cost, yet powerful flash microcontroller programmer for the Atmel 89 series. It will Program, Read and Verify Code Data, Write Lock Bits, Erase and Blank Check.
All fuse and lock bits are programmable. This programmer has intelligent onboard firmware and connects to the serial port. It can be used with any type of computer and requires no special hardware.
All that is needed is a serial communication port which all computers have.
The programmer connects to a host computer using a standard RS232 serial port. All the programming 'intelligence' is built into the programmer so you do not need any special hardware to run it. Programmer comes with window based software for easy programming of the devices
Features
• Supports major Atmel 89 series devices
• Auto Identify connected hardware and devices
• Built - in Error checking , verification and Lock facilities
• 20 and 40 pin ZIF socket on-board
• Programming in auto mode.
• On-Board RS232 Port for direct connection to PC's Serial Port
• Hex file can be downloaded easily with the help of a user-friendly JetFlashex Software
List of Supported Microcontrollers
• AT89C51, AT89LV51, AT89C52, AT89LV52, AT89C55
• AT89LV55, AT89S51, AT89LS51, AT89S52, AT89LS52
• AT89S53, AT89LS53, AT89S8252, AT89LS8252, AT89C1051
• AT89C2051, AT89C4051
JetFlasheX
• Programs Intel Hex files.
• Straightforward and intuitive user interface
• Requires RS-232 port of PC for operation
• Three simple steps to program the flash device.
System Requirements
• Windows 95/98/ME/NT/2000/XP
• RS-232 Port
• 16MB RAM
• 3MB Disk Space
• Fully Assembled and Tested Atmel 89 series Device programmer
• Serial Port Cable for PC interfacing
• CDROM containing Interlogicx JetFlashex - Programming Software and User Manual
• Power Adaptor
Introduction
ILPMCSPRO is a Device Programmer Board for Programming the flash memory of major Atmel 89 Series Microcontrollers, Ideally suited for Project Deployment .Simple to use & low cost, yet powerful flash microcontroller programmer for the Atmel 89 series. It will Program, Read and Verify Code Data, Write Lock Bits, Erase and Blank Check.
All fuse and lock bits are programmable. This programmer has intelligent onboard firmware and connects to the serial port. It can be used with any type of computer and requires no special hardware.
All that is needed is a serial communication port which all computers have.
The programmer connects to a host computer using a standard RS232 serial port. All the programming 'intelligence' is built into the programmer so you do not need any special hardware to run it. Programmer comes with window based software for easy programming of the devices
Features
• Supports major Atmel 89 series devices
• Auto Identify connected hardware and devices
• Built - in Error checking , verification and Lock facilities
• 20 and 40 pin ZIF socket on-board
• Programming in auto mode.
• On-Board RS232 Port for direct connection to PC's Serial Port
• Hex file can be downloaded easily with the help of a user-friendly JetFlashex Software
List of Supported Microcontrollers
• AT89C51, AT89LV51, AT89C52, AT89LV52, AT89C55
• AT89LV55, AT89S51, AT89LS51, AT89S52, AT89LS52
• AT89S53, AT89LS53, AT89S8252, AT89LS8252, AT89C1051
• AT89C2051, AT89C4051
JetFlasheX
• Programs Intel Hex files.
• Straightforward and intuitive user interface
• Requires RS-232 port of PC for operation
• Three simple steps to program the flash device.
System Requirements
• Windows 95/98/ME/NT/2000/XP
• RS-232 Port
• 16MB RAM
• 3MB Disk Space
